 |
 |
PO Box 426 - Highland, MI. 48357 - (248) 889-4364
|
POWERSTICKS & AccuSeals - Awarded Best New Performance Products of 2004 by RPM Motoring Monthly! |
|
|
2.5” Exhaust Butt-Joint Clamp
|
| SIZE | PART# |
|---|---|
| 2-1/2" | TC-25 |
Stainless AccuSeal® Band Clamp
Manufactured out of heavy gauge 1-1/4” wide band (.071” / 15-Gauge bright 430 Stainless), the AccuSeal band clamp is ideal for connecting mufflers & pipes together - when you intend to disassemble later on. Conventional exhaust U-Clamp assemblies put a crimp into muffler necks & pipes, making disassembly impossible without destroying components. These are the band clamps you have been looking for! (AccuSeal Clamps are widely used on OE exhaust assemblies). Super high quality grade-8 hardened hardware is included – clamps come assembled as shown.
Make clean-looking, smooth connections with superior strength. AND, you can slide components apart when needed later on. Perfect for at-the-track component removal or switching.
|
Recommended Tightening = 40-60 ft/lbs |
 |
*NOTE: It is ABSOLUTELY recommended that you cut 4 slots into the ID connection (the outside pipe) to allow for pipe contraction upon tightening. You can easily do this with a conventional cutoff wheel. Cut slots approx. 1.5” in length, & at 12, 3, 6, & 9 O-Clock positions. |
|---|
Note: Minimum quantity purchase of 4 clamps.
We can also supply large quantities!
| SIZE | PART# |
|---|---|
| 1-3/4" | AS175 |
| 2" | AS20 |
| 2-1/4" | AS225 |
| 2-1/2" | AS250 |
| 2-3/4" | AS275 |
| 3" | AS30 |
| 3-1/2" | AS350 |
| 4" | AS40 |
| 5" | AS50 |
AccuSeal is a product of Torca Products, Inc.
*NEW* Torca DuraSeal™ Band Clamp
|
Look NO further for a Severe Service Exhaust band clamp! The DuraSeal is a serious heavy-duty band clamp made for lap-joint exhaust connections (pipe-into-pipe or pipe-into-muffler), & is widely used on OEM exhaust applications - for a reason. When you are looking for a band clamp a notch up from the AccuSeal, this is the clamp. Be careful when tightening - a DuraSeal can crush pipes! Following are some key bullet points of the DuraSeal: |
 |
* Made of beefy 3/32" thick 409 Non-Bright Stainless Steel. This clamp is all function.
* 1-1/4" wide band.
* Hardened Grade-8 clear zinc-plated hardware included - clamps are fully assembled as shown.
* Torque to 35 foot-pounds.
* Will not distort or "crimp" exhaust connections like U-Clamps when installed properly
* easy disassembly of exhaust pipes later-on.
* Approx. 40% stronger rotation resistance than AccuSeal Clamps when properly installed.
* Approx. 55% stronger separation resistance than AccuSeal Clamps when properly installed.
* Available in 2-1/2" & 3" sizes.
* Available for aftermarket only through Classic Chambered Exhaust at this time.
| SIZE | PART# |
|---|---|
| 2-1/2" | DS250 |
| 2-3/4" | DS275 |
| 3" | DS30 |
Torca Products are premium quality & made in the USA (Auburn Hills, MI.), not junk imported knock-offs. We are an authorized distributor for Torca AccuSeal™ & DuraSeal™ exhaust clamps & will only distribute the best.
Click Here for our Secure Order Page
Classic Chambered Exhaust Inc. · P.O. Box 426 · Highland, MI. 48357
(248) 889-HEMI (4364) · E-Mail